Reboot Setting; Working Mode; Model2: Locating According To Vibration Mode (Default) - Concox GT03C User Manual

4.8.3 Position query via platform
The device will send position information to the platform server timely. The user can check the
position on the platform.
The platform website:
Please contact your dealer for the login methods and operations.
LBS are a rough locating way. For more accurate information, GPS locating function must be
activated. Its positioning accuracy is around 10m.
Note: to realize this function, you need the support of the network operator. And GPRS
function should be activated for the SIM card.
4.9 Restore Factory Setting
While the terminal can not work normally because of some incorrect parameter setting, you can try
to reset the settings and see whether it works.
The command:
FACTORY #
4.10 Reboot setting
If the terminal can not work normally while the parameter settings are right, you can send command
to reboot the terminal.
The command:
RESET#
After receiving this command, the terminal will reboot in 1 minute.

5 Working Mode

5.1 Model1: Locating in a regular time interval mode
After uploading the first GPS location, the terminal will activate GPS in 30mins. If located, it will send location to
platform and turn off GPS automatically. If fail to locate, then GPS will turn off and send LBS location.
Send SMS command:
mode,1#
5.2 Model2: Locating according to vibration mode (default)
In this mode, the terminal will turn on GPS as default.
If GPS locates, the terminal will send first GPS location to the platform. If GPS could not locate, it will upload
www.gpsyeah.com.