Set Sos Number; Operation - Concox GT300 User Manual

4.11 Set SOS Number

(1) Add SOS number Via SMS command
Send SMS command: SOS, A,number1,number2,number3
You could set 3 SOS numbers in maximum. If set successfully, the terminal will reply "ok".
e.g. SOS,A, 13510****60,135116****6,136126****8#
SOS,A, 13510****60#
SOS,A, ,135116****6#
SOS,A, , ,136126****8#
(2) Delete SOS Numbers
Send SMS command: SOS, D,1,2,3#
e.g. SOS, D,1# means delete the first number
SOS, D,3# means delete the third number
If you do not know the sequence number, you can also delete the number by SMS command like this:
D,number#
e.g. SOS, D, 13527852360#
It will reply "OK" if the number is deleted successfully.
(3) Add SOS numbers via platform
You can set SOS number via the platform after activating the terminal.

5 Operation

5.1 Arm/disarm
(1) Via Mode Button
Short press twice in a row to arm the terminal. In arm condition, short pressing twice in a row will disarm the
terminal.
(2) Via calls
Any SOS numbers call the terminal (must be the SOS numbers), and then end up the call in 10s by the mobile side
to arm the terminal. The terminal will reply a SMS message "OK". During arm state, any SOS numbers call the
terminal (must be the SOS numbers), and then end up the call in 10s to disarm the terminal. If the call does not
end up, it will enter the monitoring condition.
(3) Via SMS command
Any SOS number can send SMS command"111" to arm the terminal (must be the SOS number). And it will
automatically reply "OK" if set successfully. Any SOS number can send SMS command"000" to disarm the
(set the first SOS number)
(set the second SOS number)
(set the third SOS number)
(D means delete SOS number)
means delete this SOS number directly.
#(A means add number).
(set all 3 SOS numbers)
SOS,