LED Indication Power Status (Red) GNSS Status (Blue) Cellular Status (Green) Power supply Status (Red, Blue, Green)
Page 6
Interfaces Wiring of Standard Version ’ ’ ’...
Page 7
9-30VDC 12/24V Relay Relay START 86 30 87a 85 Ignition key Power connection The standard power supply ranges from 9V to 30VDC. During installation, negative side should connect to the ground. Do not connect with other ground wires simultaneously. lgnition wire ACC line(orange) connects to vehicle's ACC, detecting ignition.
while the yellow line connects to the device's relay control (yellow line on power cord). Find the fuel pump of the vehicle and cutoff its positive power line. The positive side of fuel pump connects to the green line(87a) while the side closing to starter motor connects to green line(30), as the below chart.
Need help?
Do you have a question about the VL101G and is the answer not in the manual?
Questions and answers