Lamps - BMW K 1300 S Rider's Manual

Remove the lock washer 2; to
do so, press the unlock but-
ton 3.
Make sure ground is level and
firm and place the motorcycle
on its side stand.
Push rear wheel stand from left
into rear axle.
Mount lock washer 2 from right
by pressing release button.
Position motorcycle upright
while simultaneously pressing
grip of stand back so that both
stand rollers rest on ground.
Then press the grip down to
the ground.
To ensure a secure position,
install lever 4 on the short side
of the stand.

Lamps

Replacing low-beam and
high-beam bulbs
The alignment of the con-
nector may differ from the
illustration depending on the bulb
to be replaced.
Make sure the ground is level
and firm and park the motorcy-
cle.
8
99
z