Front Wheel Stand - BMW K 1300 S Rider's Manual

Position muffler cover 2 and fit
three screws 1.
without center stand Genera-
OA
tion II
Remove rear wheel stand.

Front wheel stand

Mounting front wheel
stand
The BMW Motorrad front
wheel stand is not designed
for holding motorcycles without a
center or other auxiliary stands. A
motorcycle standing on the front
wheel stand and the rear wheel
alone can fall over.
Place the motorcycle on the
center stand or an auxiliary
stand before lifting it with the
BMW Motorrad front wheel
stand.
Use basic stand with part
number (83 30 0 402 241) in
combination with front-wheel
adapter (83 30 0 402 243).
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing rear-wheel stand
( 98).
with center stand Generation
II OA
Make sure ground is level and
firm and place motorcycle on
its center stand.
Loosen securing screws 1.
Push two mounting pins 2 far
enough apart that front sus-
pension fits between them.
Use locating pins 3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
8
97
z