Replacing front turn
indicator bulbs
Make sure the ground is level
and firm and park the motorcy-
cle.
Switch off the ignition.
Remove screw 1.
Pull lamp housing on screw
connection side out of mirror
housing.
Remove bulb holder 2 from
lamp housing by turning it
counterclockwise.
Remove bulb 3 from bulb
holder.
Replacing defective bulb
Bulbs for flashing turn
indicators, front
W16W / 12 V / 16 W
To prevent contaminants from
being deposited on the new
bulb's glass surface, always use
a clean, dry cloth to hold it.
8
103
z