BMW K 1300 S Rider's Manual page 86

8
84
Front brake-pad wear
limit
min 0.04 in (min 1.0 mm)
z
(Only friction material
without carrier plate. Wear
markings (grooves) must be
clearly visible.)
If the wear indicators are no
longer clearly visible:
Dropping below the mini-
mum pad thickness leads
to reduced braking performance
and may result in damage to the
brakes.
In order to ensure the operating
reliability of the brake system,
make sure that the brake pads
are not worn beyond their mini-
mum thickness.
Have the brake pads replaced
at an authorized service facil-
ity, preferably an authorized
BMW Motorrad retailer.
Check rear brake pad
thickness
Make sure ground is level and
firm and park motorcycle.
Conduct a visual inspection of
the brake pad thickness. Di-
rection of view: from right to
brake caliper 1.