Installing Rear Wheel - BMW K 1300 S Rider's Manual

Shift into first gear.
Remove five screws 1 on rear
wheel, holding wheel as you do
so.
When using the
BMW Motorrad rear wheel
stand: remove the lock washer.
Lower rear wheel to the ground
and roll out toward rear.
When using the
BMW Motorrad rear wheel
stand: remount the lock
washer.

Installing rear wheel

Malfunctions may occur
during control interventions
by ABS or ASC if a wheel other
than the standard wheel is in-
stalled.
Please see the information on
the effect of wheel sizes on the
ABS and ASC running gear con-
trol systems at the beginning of
this chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
When using the
BMW Motorrad rear wheel
stand: remove the lock washer.
Roll and mount rear wheel onto
rear wheel support.
When using the
BMW Motorrad rear wheel
stand: remount the lock
washer.
Fit five screws 1 and tighten
diagonally with specified
torque.
Tighten rear wheel on
wheel flange
Tightening sequence: diago-
nally
44 lb/ft (60 Nm)
8
95
z