BMW K 1300 S Rider's Manual page 92

8
90
Unclip two retaining clips 1 of
sensor cable on brake line.
Mask off areas of wheel rim
that could be scratched in the
z
process of removing the brake
calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake rotor on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove securing screws 2 of
left and right brake calipers.
Push brake pads 3 slightly
apart by turning brake caliper 4
back and forth against brake
rotor 5.
Carefully pull brake calipers
back and outward to remove
them from the brake rotors.