BMW K 1300 S Rider's Manual page 94

torque can work loose or their
8
threads can suffer damage.
Always have the tightening
92
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
The front wheel must be
installed right way round to
rotate in the correct direction.
Observe the direction of rota-
tion arrows on the tires or on the
rim.
z
Roll front wheel into front
wheel guide.
Lift front wheel and install
quick-release axle 3 with
torque.
Quick-release axle in
threaded bush
37 lb/ft (50 Nm)
Tighten the right-hand axle
clamping screw 2 with the
specified torque.
Clamping bolt in wheel
carrier
14 lb/ft (19 Nm)
Remove front wheel stand.
without center stand Genera-
tion II OA
Remove rear wheel stand.
Insert ABS sensor into hole
and install screw 1.
Slide the brake calipers onto
the rotors.