BMW K 1300 S Rider's Manual page 37

A tire inflation pressure out-
side the permissible toler-
ance result in poorer handling of
the motorcycle.
Adapt your style of riding
accordingly.
Correct tire inflation pressure at
the next opportunity.
Before adjusting the tire in-
flation pressure, observe
the information on temperature
compensation and on inflation
pressure adjustment in the chap-
ter "Technology in detail".
Have the tire checked for dam-
age at an authorized service
facility, preferably an authorized
BMW Motorrad dealer.
If you are unsure about the tire's
suitability for continued riding:
Do not continue riding.
Contact roadside service.
Transmission error
with Tire Pressure Control
OE
(TPC/RDC)
-- -- --
" " or " " is indicated.
Possible cause:
The vehicle's speed has not ex-
ceeded the threshold of approx.
19 mph (30 km/h). The TCP/
RDC sensors do not send their
signal until after this speed has
been exceeded for the first time
( 72).
Watch the TCP/RDC display at
a higher rate of speed. A con-
tinuous error is only present if
the general warning lamp also
lights up. In this case:
Have fault eliminated at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
Possible cause:
There is a fault in the radio con-
nection to the TPC/RDC sensors.
Possible causes are radio sys-
tems in the surrounding area,
which interfere with the connec-
tion between the TPC/RDC con-
trol unit and the sensors.
Watch the TPC/RDC display in
another environment. A con-
tinuous error is only present if
the general warning lamp also
lights up. In this case:
Have fault eliminated at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
dealer.
Sensor defective or
system fault
with Tire Pressure Control
OE
(TPC/RDC)
General warning light shows
yellow.
3
35
z