BMW K 1300 S Rider's Manual page 107

Press bulb 2 into socket and
turn counterclockwise to re-
move.
Replace defective bulb.
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
To prevent contaminants from
being deposited on the new
bulb's glass surface, always use
a clean, dry cloth to hold it.
Press bulb 2 into socket and
install by turning clockwise.
Insert lamp glass in turn indica-
tor housing.
Install screw 1.
Diode tail light
If more LEDs have burned out in
the tail light than are indicated in
the Technical Data below, the tail
light bulb must be replaced. In
this case:
Contact an authorized service
facility, preferably an authorized
BMW Motorrad retailer.
Maximum number of de-
fective LEDs in taillight
1 (Brake light/taillight (red))
1 (License plate light (white))
8
105
z