Table of Contents
Advertisement
TROUBLESHOOTING
Transmitter
Transmitter light does not blink
Transmitter light blinks, but receiver light does
not blink
Status LED on transmitter blinks at incorrect
times
Status LED on the receiver blinks, but the
camera doesn't operate
Receiver
Insert a fresh battery into the battery chamber, ensuring that the
polarity is correct.
Check to be sure that the power switch for the receiver is in the
On position.
Ensure that the receiver and transmitter are set to the same channel.
Insert a fresh battery into the battery chamber, ensuring that the
polarity is correct.
Remove receiver from camera and reinstall it, ensuring that it's
securely attached.
11
Advertisement
Table of Contents
