Table of Contents
Advertisement
4. Turn the receiver on by
pressing the power button.
5. The red Power LED on the
receiver will blink on and off
when the receiver is connected
properly to the camera.
6. Ensure that the receiver is set
to the same channel as the
transmitter.
7. To turn the receiver off, press
the power switch and hold it
for approximately one second.
The red Power LED will turn
off.
Note: The receiver will enter
sleep mode after it has been on
for two hours without being
activated. When the receiver is in
sleep mode, press the On switch
to resume operation.
7
Advertisement
Table of Contents
