Table of Contents
Advertisement
5.3
Unit Name and Device ID
Unit name
In the "Display" menu:
There is an item named "Unit Name". The default unit name is "Embedded Net DVR". Move
"Active Frame" to unit name edit box, press
the unit name. About how to input characters, please refer to chapter 3.4. Press
finish modification. Select "Confirm" button and press
and make it into effect. Press "Cancel" button or
Device ID:
When you use IR controller to operate DVR, you must use device ID to select DVR. The
default device ID of DVR is "88". If there are more than one DVR in one place, please define
different device ID for each DVR. Otherwise, the IR controller will control all DVR with the same
device ID at the same time.
In "Display" menu, move "Active Frame" to the device ID edit box, in the edit status, you
can use numeric keys to input new device ID. The device ID value is ranged among 01-100.
After you finish the modification, press "Confirm" button to save and take effect or press
"Cancel" to abort modification.
User Manual of NVR Series DVR
【
】
E DIT
k ey to enter into edit status, you can modify
【
E NTER
【
】
E SC
k ey to abort modification.
Total
44
104
P a g e
【
E NTER
】
, you can save the new unit name
】
k ey to
Advertisement
Table of Contents
