Nitro NVR4SGX User Manual page 58

Step 5: Motion alarm policy: Move "Active Frame" to the corresponding "Policy" button of
motion detection alarm, press
Step 6: Motion alarm record channel setup: When there is motion alarm happened, you
can trigger related camera to start recording. In "Motion Alarm Handle" menu, you can select one
or more record channels. Please use
Note: In order to make the cameras start recording, in "Recording" menu, you must enable
recording schedule and set "Rec Type" as "Motion Detection" or "Motion | Alarm". Please refer to
chapter 5.12 for recording setup.
Step 7: Motion alarm schedule: When the motion alarm is happened in schedule, DVR will
response such as "On Screen Warning", "Audible Warning", "Upload to Center" and "Trigger
Alarm Output". You can setup 4 time periods for one day and 7 days for one week.
Note: Time periods in one day can not be repeat.
User Manual of NVR Series DVR
【 E NTER 】 k ey to enter into "Motiomn Alarm Handle" menu:
【 E NTER 】 o r 【
Total
58
P a g e
E DIT 】 k ey to enable the flag into " ".
104