Nitro NVR4SGX User Manual page 73

button to save all modification.
Please make sure the PTZ you are using can support preset function.
Sequence setup
In "PTZ" menu, press "Setup" button on the right side of "Sequence No" item, you can enter
into "Sequence" setup menu:
In "Sequence" setup menu, first input the sequence number. The sequence is among 1 --- 16.
Each sequence is made up of cruise points, and each cruise point includes preset number, dwell
time and dwell speed. Dwell time is the time staying at that preset number. Dwell speed is the
speed that PTZ is moved to that preset number.
Press "Add" button to add one cruise point.
Press "Confirm" button to save the cruise point into the sequence.
After you finish setup the sequence number, press "StartSeq" to check the current sequence.
Perss "StopSeq" button to stop checking.
You can delete cruise points in one sequence.
After you finish sequence setup, press "Return" button back to "PTZ" menu. In "PTZ" menu,
perss "Confirm" button to save the modification.
Please make sure the PTZ you are using can support sequence function.
Cruise setup
In "PTZ" menu, press "Setup" button on the right side of "Cruise" item, you can enter into
"Cruise" setup menu:
User Manual of NVR Series DVR
Total
73 104
P a g e