Connecting Peripheral Device - Nitro XHDART User Manual

1.2 Connecting Peripheral Device

This section describes how to connect peripheral devices efficiently to the DVR.
Install the DVR on flat surface. If required, attach a rubber mount for installation. If a 19-inch rack is used with 1.5U Height
case, it is recommend to install the system on a shelf and use 2.5~3U (1U=1.75 inch or 4.45 cm) space for proper ventilation.
N
Install the system in a location with good ventilation to prevent overheating.
OTE
4ch 1HDD type
8ch 1HDD type
User's Manual | 8