Table of Contents
Advertisement
5.7
Mask Area Setup
In some cases, maybe you want mask the sensitive area. This area will not be preview and
recorded. The mask area setup steps are following:
Step 1: Enter into "Image Setup" menu:
Step 2: Select one camera: You can use
Step 3: Enter into mask area setup interface: Enable the check box beside "Privacy Mask"
item, you can press
【
E DIT
"Active Frame" to "Area" button on the right side of mask check box, press
into mask area setup interface.
Step 4: Setup mask area: In the mask area setup interface, there is one small yellow pane on
the upper left side. For PAL camera, the whole screen is divided into 22*18 panes (22*15 for
NTSC), you can use
【 ↑ 】 【 ↓ 】 【 → 】 【 ← 】
User Manual of NVR Series DVR
【 】 【 】
】
k ey to change the flag into " ", and active "Area" button. Move
keys to move the yellow pane to your hope position and
Total
50
P a g e
k eys to select one camera.
【
E NTER
104
】
key to enter
Advertisement
Table of Contents
