Ptz Control - Nitro NVR4SGX User Manual

Note: In edit box, use 【 【 【 【 】 】 】 】 / 【 【 【 【     】 】 】 】 to move cursor and 【 【 【 【 E DIT 】 】 】 】 key to delete the numeral
in front of the cursor.
Step 4: Modify password successfully
Move the "Active Frame" to "Confirm" button, press
modified successfully, you will get the main menu. Or an error dialog will be pop up. You can
repeat step 3 to modify again.
4.4

PTZ Control

Note: The user must have the "PTZ control" right.
PTZ control interface
In preview mode, press
correct password, you can enter into PTZ control interface.
In menu mode, press
There is "PTZ Control" prompt in the PTZ control interface. The displayed camera name
means which channel's PTZ is under control. For example, "Camera 01" means you are
st
controlling the 1 camera PTZ.
Select channel
In PTZ control mode, you can press numeric keys to select channel. If DVR has less than 10
channels, press one numeric key to select. For example, press
DVR has 10 or more than 10 channels, you must press two numeric keys to select. For
example, press 【 0 】 【 2 】
After you select the camera PTZ, you can use the short keys to control PTZ.
User Manual of NVR Series DVR
【 P TZ 】 k ey, in the login dialog, select one user name and input the
【 P TZ 】 k ey, you can enter into PTZ control interface directly.
nd
to select 2 camera PTZ, and press
27
P a g e
【 E NTER 】
【 2 】 k ey to selct 2
【 1 】 【 2 】 to select 12
Total
104
k ey. If the password is
nd
camera PTZ. If
th
camera PTZ.