Table of Contents
Advertisement
Display mode (Not available in NVR4SGX): There are several display modes:
Opaque&Steady, Transparent&Steady, Transparent&Flashing, Opaque&Flashing,
Move "Active Frame" to "OSD" item, you can select one mode.
Display position and format: Move "Active Frame" to "Position" button on the right side of
【
"OSD", press
E NTER
22*15) small panes, and OSD position is in red. You can use
the OSD position.
Press
【
E DIT
】
k ey to select OSD format. There are following OSD formats:
MM DD YYYY W hh:mm:ss (default)
MM DD YYYY hh:mm: ss
YYYY MM DD W hh:mm:ss
YYYY MM DD hh:mm:ss
Here YYYY means year, MM means month, DD means day, W means weekday, hh menas
hour, mm means minute and ss means second.
Press
【
E NTER
】
Copy parameters: After you setup the properties of one camera, you can copy it's parameter
to any other camera or all cameras.
After you save the modification, you can find the modification will be taken into effective.
You can perss "Cancel" button or
Camera Name
In "Image Setup" menu, you can define name for each camera.
name can not be copied.
User Manual of NVR Series DVR
】
t o enter into setup image, you can find there are 22*18 (for NTSC,
to save and return "Image" menu or perss to
【
E SC
】
k ey to abort.
47
P a g e
【 】 【 】 【 】 【
【
E SC
Total
104
】
k eys to move
】
a bort modification.
Please note that camera's
Advertisement
Table of Contents
