Table of Contents
Advertisement
5.6
Video Parameters Setup
For different camera and different background, in order to get the best video image, you need
to adjust video parameters such as brightenss, saturation, contrast and hue, etc.
You can setup the camera individually, and also you can copy the video parameters of one
camera to any other cameras. Here are the setup steps:
Step 1: Enter into "Image Setup" menu:
Step 2: Select camera: Please use
Step 3: Adjust brightness, contrast, saturation and hue: Move "Active Frame" to the
"Adjust" button on the right side of Brightness, Contrast, Saturation and Hue, press
key, you will enter into the corresponding adjust interface. In the adjust interface, there is one
scroll bar at the bottom, you can use
changed at the same time. When you are satisfied with the real time video image, press
to return "Image Setup" menu.
Step 4: You can copy the video parameters of current camera to any other cameras. Or you
can repeat setp2 and step3 to adjust for any other camera.
After adjust, in "Image Setup" menu, press "Confirm" button to save parameters and make
them into effective. Otherwise, perss "Cancel" button or
User Manual of NVR Series DVR
【 】 【 】
k eys to select one camera.
【 】 【 】
k eys to adjust and can find the video image will be
【
E SC
Total
49
104
P a g e
【
E NTER
【
】
k ey to abort modification.
】
E NTER
】
Advertisement
Table of Contents
