User Name And Password - Nitro NVR4SGX User Manual

4.3 Video spot output
Make sure the numeric button is in "function" mode (the status lamp is off) Press
button to switch numeric button between "numeric" mode and "function" mode.
Step1: Connect Video out 2 and monitor with a cable.
Step2: Press 【3】to enter into spot out mode.
Step3: Press 【shift】to enter into numeric mode
Step4: Press 【1】 to 【4】 button to switch video spot out from channel 1 to
channel 4
Note: make sure there is video signal input or spot out will only show blue screen.
4.4

User name and password

Note: When DVR is delivered from factory, there is only one default administrator
named "admin", and password is "12345". The administrator's name can not be modified,
while the password can be modified. The administrator can create 15 users and define their
user rights.
Login
Login dialog is following:
Use 【 】 【 】 / keys to select one user, perss
corresponding password, press
to "Confirm" button. Press
means the user name and password are not matched. After three error times, DVR will enter into
preview mdoe.
Modify password
For those users created by admin, they can modify their password as following:
Step1: Enter into main menu
Press 【 M ENU 】 key, in the login dialog, select your user name, input the correct password, you
can enter into the main menu.
User Manual of NVR Series DVR
【 】
【 】
E NTER k ey to exit edit box. The "Active Frame" will be moved
【 】
E NTER k ey to enter into main menu. If there is beeper alarm, it
Total
25
P a g e
key to enter into "Password" edit box, input
104
【shift】