Table of Contents
Advertisement
The steps of camera name setup:
Step 1: Select one camera.
Step 2: Move "Active Frame" to camera name edit box, press
status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4).
The camera name can support 32 characters.
Step 3: Press
【
E NTER
Move "Active Frame" to "Confirm" button, press
can see the new camera name. Press "Cancel" button or
Setup Camera Name Position
If you do not want to display camera name, just disable the check box beside camer name
edit box. The disable flag is "
position. You can copy the position to any other camera. The setup stpes are:
Step 1: Enter into "Image Setup" menu.
Step 2: Select one camera.
Step 3: Enable the check box on the right side of camer name, then you move "Active
Frame" to "Position" button, press
that interface, you can use
position is fixed, press
【
save it. In the "Image Setup" menu, perss "Cancel" button or
modification.
User Manual of NVR Series DVR
】
k ey to exit edit status.
×
" . If you enable the check box, you can setup the camera name
【
E NTER
】
to enter into camera name position setup interface, in
【 】 【 】 【 】 【
E NTER
】
a nd return "Image Setup" menu, and press "Confirm" button to
48
P a g e
【
E DIT
【
E NTER
】
to save the modification and you
【
E SC
】
k ey to abort.
】
k eys to move camera name position. When the
【
E SC
Total
104
】
k ey to enter into edit
】
k ey, you can abort the
Advertisement
Table of Contents
