5.8
View Tampering Alarm
If you enable this function, when someone blocks the camera spitefully, DVR will make
warning alarm.
Step 1: Enter into "Image Setup" memu:
Step 2: Select camera: Please use
Step 3: Select sensitivity: You can use
Tampering" item. The sensitivity options are: Low, Normal and High. Select one of them will
active "Area Setup" and "Policy Setup" function.
Step 4: View tampering area setup Move "Active Frame" to "Area" button, press
【
】
E NTER
key to enter into area setup interface. The setup methods are same as that of mask area
setup. After setup the area, press
【
】
E SC
k ey to abort.
Only one view tampering area can be setup.
Step 5: View tampering alarm setup In "Image Setup" menu, move "Active Frame" to
【
"Policy" button, press
NVR4SGX , move "Active Frame" to "Policy" button In "Advanced settings" menu , press
【
E NTER
】
k ey to enter into "View Tampering Handle" menu.
User Manual of NVR Series DVR
【 】 【 】
【 ↑ 】 【 ↓ 】
【
】
E NTER
k ey to return "Image Setup" menu. You can press
】
E NTER
k ey to enter into "View Tampering Handle" menu. For the
52
P a g e
k eys to select one camera.
k eys to select the sensitivity for "View
Total
104