Table of Contents
Advertisement
ADVANCED OPERATIONS
encode/decode setting will be reversed. This ables the user to talk to other users without using the
repeater. Press the key again, it beeps twice and Talk-around is deactivated.
Note:Under the talk around state, the transceiver can not communicate with other transceivers through
repeaters.
Frequency Reverse
Under the standby conditions, pressing and holding the programmed key, it beeps and activates
Frequency Reverse. In this condition, the current receiving frequnecy is switched to the transmitting
channel's, and the CTCSS or DCS encode/decode setting will be interchanged.
Pressing this key again, it beeps twice and exits reverse function. This is to monitor other stations
without using repeaters.
Current Channel Power Enquiry
Under the standby conditions, pressing the programmed key, it will announce the current output
setting of the selected channel.
TX Power Switch
Under the standby conditions, pressing the programmed key, it beeps and will change the output
power setting of the selected channel.
19
Professional
FM Transceiver
Advertisement
Table of Contents
