Connecting The Phone - Swisscom Classic A121 User Manual

Cordless dect telephone

Hide thumbs Also See for Classic A121:

Table of Contents

Setting up the telephone

Connecting the phone

Before you can start using your telephone you must plug in the telephone connector

cable and the mains cable.

Socket for mains cable

Safety note

Use only the mains units supplied for the base station or charging unit.

Telephone connector cable

The telephone connector cable has two different plugs. Insert the smaller plug in the

socket marked with the telephone symbol on the base station, and fit the cable into the

corresponding cable duct. Insert the larger plug in your telephone connection socket.

Mains cable

First, insert the mains cable in the socket marked with the mains connector symbol on

the base of the base station or charging unit, and fit the cable in the moulded cable

duct. Then insert the mains plug in the 230 V socket.

Note

Your telephone will not function if the mains connector is not plugged in or

during a power failure.

Socket for telephone connector cable

Table of Contents

Do you have a question about the Classic A121 and is the answer not in the manual?