Internal Calls; Enquiries; Internal Enquiry Call; External Enquiry Call - Swisscom Classic A121 User Manual

Cordless dect telephone

Hide thumbs Also See for Classic A121:

Table of Contents

Telephoning

Internal calls

You can call other handsets which are registered with your base station. This allows you

to make internal calls free of charge.

1. Press INT, dial the relevant handset number and press OK to confirm. Pressing INT auto-

matically dials the second handset if only two handsets are registered with the base sta-

tion.

2. Press

to end the call.

Note

• If you receive an external call while conducting an internal call, every hand-

set which is not in use will ring.

• If a handset is in use, you will hear a signal alerting you to the incoming

external call. Press the softkey under OPTION, ACCEPT/END to end the

internal call and accept the external call. Or press the softkey under

OPTION, ACCEPT/HOLD to put the internal call on hold or under OPTION,

REJECT to reject the external call.

You are conducting a call and want to call an internal party without ending the external

call. Internal enquiries are managed by the base station and are not dependent on your

network operator's available services.

Procedure:

1. You are conducting a call and want to call another external party without ending the

active external call.

2. Press the enquiry key

to start the external enquiry.

Table of Contents

Do you have a question about the Classic A121 and is the answer not in the manual?