Brokering (Switching Between Two Calls); Call Transfer; Internal Call Transfer; External Call Transfer - Swisscom Classic A121 User Manual

Cordless dect telephone

Hide thumbs Also See for Classic A121:

Table of Contents

Telephoning

Brokering (switching between two calls)

You have two active calls (1 internal and 1 external), one of which is on hold. You can

switch between the two by brokering.

1. You are conducting two calls, one of which is on hold.

2. Press the softkey under OPTION, BROKERING to switch between the call partners.

3. Press

to end one of the calls. The remaining call partners are automatically con-

nected with each other.

Note

You can connect all call partners together by pressing the softkey under

OPTION, JOIN.

You can transfer the call you are conducting to another handset (= switching).

1. Press INT and dial the handset to which you wish to transfer the call. The external cal-

ler is put on hold.

2. If the second handset answers, you can talk to the internal call partner without the

external caller hearing you. Press

Note

• You cannot use the INT key if the call duration is not displayed.

• If the second handset does not answer, you can end the ringing signal and

return to the original call by pressing the softkey under END.

You can transfer an incoming call to another telephone directly by pressing the softkey

under OPTION, CD.

to transfer the call.

Table of Contents

Do you have a question about the Classic A121 and is the answer not in the manual?