Recall; Call Back On Busy (Completion Of Calls To Busy Subscriber/Ccbs); Delete Call Back; Malicious Call Identification (Mcid) - Swisscom Classic A121 User Manual

Cordless dect telephone

Hide thumbs Also See for Classic A121:

Table of Contents

Network functions (supplementary services)

Recall

This service is dependent on your network operator.

Call back on busy (Completion of Calls to Busy Subscriber / CCBS)

If a number you have dialled is busy, you can activate call back by pressing the softkey

under CCBS or by pressing and holding

in the display with

as the called party has replaced the receiver i.e. as soon as his or her line becomes free.

An activated callback can be deactivated (= deleted) in the relevant menu.

This service is available from Swisscom on request. Once Swisscom has activated the ser-

vice, malicious calls are registered during the call and up to 20 seconds after the receiver

is replaced. The exchange registers the calling number, date and time, even if the caller

has withheld his or her number.

). If call back on busy is activated, a special signal is heard as soon

down (the acitvated call back is signalled

Table of Contents

Do you have a question about the Classic A121 and is the answer not in the manual?