Table of Contents
Advertisement
Settings
Telephony
Procedure:
1. Press the softkey under MENU. Press
menu and press OK to confirm.
2. Scroll to the relevant submenu and make the following settings:
Automatic DTMF
Activate "Automatic DTMF" to switch automatically to DTMF dialling during an active
call.
Auto Talk
An incoming call can be accepted by pressing the talk key. If you activate Auto Talk, you can
accept a call simply by lifting the handset from the base station without pressing any key.
System PIN
Procedure:
1. Press the softkey under MENU. Press
menu and press OK to confirm.
2. Change the existing system PIN as required.
Note
• If you wish to register/deregister new handsets with the base station, you
must enter the base station's 4-digit system PIN (default setting: 000).
• We recommend that you change the system PIN to protect your telephone
against unauthorised access.
• Attention: Please take good note of your new system PIN! If you forget it,
Swisscom will need to intervene and will charge you for this service.
to scroll to
TELEPHONY
to scroll to
SYSTEM PIN
47
in the
SETTINGS
In the
SETTINGS
Advertisement
Table of Contents
Need help?
Do you have a question about the Classic A121 and is the answer not in the manual?
Questions and answers