Status: Port Details - ZyXEL Communications XS3700 Series User Manual

10 gbe l2+ switch
Hide thumbs Also See for XS3700 Series:
Table of Contents

Advertisement

The following table describes the labels in this screen.
Table 7 Status
LABEL
Port
Name
Link
State
PD
LACP
TxPkts
RxPkts
Errors
Tx KB/s
Rx KB/s
Up Time
Clear Counter

5.4.1 Status: Port Details

Click a number in the Port column in the Status screen to display individual port statistics. Use this
screen to check status and detailed performance data about an individual port on the Switch.
Chapter 5 ZON Utility, ZON Neighbor Management and Port Status
DESCRIPTION
This identifies the Ethernet port. Click a port number to display the Port Details screen
(refer to
Figure 20 on page
This is the name you assigned to this port in the Basic Setting > Port Setup screen.
This field displays the speed (such as 100M for 100 Mbps, 1000M for 1000 Mbps, or 10G
for 10 Gbps) and the duplex (F for full duplex). This field displays Down if the port is not
connected to any device.
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port. (See
Section 11.1.3 on page 109
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it displays
STOP.
(For PoE models only) This field displays whether or not a powered device (PD) is allowed to
receive power from the Switch on this port.
This fields displays whether LACP (Link Aggregation Control Protocol) has been enabled on
the port.
This field shows the number of transmitted frames on this port.
This field shows the number of received frames on this port.
This field shows the number of received errors on this port.
This field shows the transmission speed of data sent on this port in kilobytes per second.
This field shows the transmission speed of data received on this port in kilobytes per second.
This field shows the total amount of time in hours, minutes and seconds the port has been
up.
Type a port number, select Port and then click Clear Counter to erase the recorded
statistical information for that port, or select Any to clear statistics for all ports.
XS3700 Series User's Guide
49).
for more information).
48

Advertisement

Table of Contents
loading

Table of Contents