Table of Contents
Advertisement
Table 59 Advanced Application > Mirroring (continued)
LABEL
Apply
Cancel
14.1.2 Remote Port Mirroring
Use this screen to create a remote port mirroring (RMirror) VLAN through which the mirrored traffic
is forwarded.
Click the RMirror link in the Advanced Application > Mirroring screen. The following screen
opens.
Figure 83 Advanced Application > Mirroring > RMirror
The following table describes the labels in this screen.
Table 60 Advanced Application > Mirroring > RMirror
LABEL
Active
RMirror VLAN ID
Apply
Cancel
VLAN
Active
Delete
Cancel
Chapter 14 Mirroring
DESCRIPTION
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select the option to enable the VLAN.
Specify the ID number of remote port mirroring (RMirror) VLAN.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the nonvolatile memory when you are done
configuring.
Click Cancel to begin configuring this screen afresh.
This field displays the ID number of the RMirror VLAN. Click on the VLAN ID number to
change the settings.
This field displays whether the VLAN is enabled or not.
Check the rule(s) that you want to remove in the Delete column and then click the
Delete button.
Click Cancel to begin configuring this screen afresh.
XS3700 Series User's Guide
134
Advertisement
Table of Contents
