Table of Contents
Advertisement
Table 39 Advanced Application > VLAN > VLAN Configuration > Voice VLAN Setup
LABEL
Cancel
Index
OUI address
OUI mask
Description
Delete
Delete
Cancel
7.11 MAC-based VLAN
The MAC-based VLAN feature assigns incoming untagged packets to a VLAN and classifies the
traffic based on the source MAC address of the packet. When untagged packets arrive at the switch,
the source MAC address of the packet is looked up in a MAC to VLAN mapping table. If an entry is
found, the corresponding VLAN ID is assigned to the packet. The assigned VLAN ID is verified
against the VLAN table. If the VLAN is valid, ingress processing on the packet continues; otherwise,
the packet is dropped.
This feature allows users to change ports without having to reconfigure the VLAN, which allows
better mobility. You can assign priority to the MAC-based VLAN and define a MAC to VLAN mapping
table by entering a specified source MAC address in the MAC-based VLAN setup screen. You can
also delete a MAC-based VLAN entry in the same screen.
Click MAC-based VLAN in the VLAN Configuration window to see the following screen.
Figure 56 Advanced Application > VLAN > VLAN Configuration > MAC-based VLAN Setup
Chapter 7 VLAN
DESCRIPTION
Click Cancel to begin configuring this screen afresh.
This field displays the index number of the Voice VLAN.
This field displays the OUI address of the Voice VLAN.
This field displays the OUI mask address of the Voice VLAN.
This field displays the description of the Voice VLAN with OUI address.
Click the Delete check box to select Voice VLAN OUI entry you wish to remove.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
XS3700 Series User's Guide
97
Advertisement
Table of Contents
