Table of Contents
Advertisement
7.2.1 Status: Port Details
Click a number in the Port column in the Status screen to display individual port
statistics. Use this screen to check status and detailed performance data about an
individual port on the Switch.
Figure 36 Status: Port Details
The following table describes the labels in this screen.
Table 9 Status > Port Details
LABEL
Port Info
Port NO.
Name
Link
Status
XGS4700-48F User's Guide
DESCRIPTION
This field displays the port number you are viewing.
This field displays the name of the port.
This field displays the speed (either 100M for 100Mbps, 1000M for 1000
Mbps, and 10G for 10 Gbps) and the duplex (F for full duplex).
If STP (Spanning Tree Protocol) is enabled, this field displays the STP
state of the port (see
Section 13.1.3 on page 151
If STP is disabled, this field displays FORWARDING if the link is up,
otherwise, it displays STOP.
Chapter 7 System Status and Port Statistics
for more information).
101
Advertisement
Table of Contents
Troubleshooting
