Wyse S10 Administrator's Manual page 70

64
Appendix A
Use the guidelines shown in Table 5 when creating and adding the DHCP option tags you
need for your thin clients.
Table 5 DHCP Options
Option
1
2
3
6
15
28
44
51
52
53
54
55
57
58
59
61
161
Tip
Ensure that within the DHCP scope these new DHCP option tags you create
are activated (this can be done using the Configure Options command),
before you add them.
Description
Subnet Mask
Time Offset
Router
Domain Name Server
(DNS)
Domain Name
Broadcast Address
WINS servers IP
Address
Lease Time
Option Overload
DHCP Message Type
DHCP Server IP
Address
Parameter Request
List
Maximum DHCP
Message Size
T1 (renew) Time
T2 (rebind) Time
Client identifier
FTP server list
Notes
Required. However, it is not is not required unless
the thin client must interact with servers on a
different subnet (MS DHCP requires a subnet
mask and will always send one).
Optional.
Optional, but recommended. It is not required
unless the thin client must interact with servers on
a different subnet.
Optional, but recommended.
Optional, but recommended. See Option 6.
Optional.
Optional.
Optional, but recommended.
Optional.
Recommended.
Recommended.
Sent by thin client.
Optional (always sent by thin client).
Optional, but recommended.
Optional, but recommended.
Always sent.
Optional string. Can be either the name or the IP
address of the FTP server. If a name is given, the
name must be resolvable by the DNS server(s)
specified in Option 6. If the option provided by the
server is blank or the server provides no value for
the field, the machine on which the DHCP server
resides is assumed to also be the FTP server.