Table of Contents
Advertisement
Configuring Local Settings Options
•
Delay before repeat - Repeat parameters for held-down key. Select the Delay before
repeat (either 1/5 second, 1/4 second, 1/3 second, 1/2 second, 1 second, 2
seconds, or No Repeat). The default is 1/3 second.
•
Repeat Rate - Select Slow, Medium, or Fast. The default is Medium.
Use the Mouse tab to select the Mouse Speed and mouse orientation (you can swap
mouse buttons for left-handed operation by selecting Swap left and right mouse
buttons).
Use the Volume tab to select the volume settings for connected devices.
Use the following guidelines for the Serial tab:
•
Select Port - Select the port to which this setup definition applies. Either COM 1, COM
2, COM 3, or COM 4 can be selected (default is Port COM 1). For Models SX0 and
VX0, COM 1 or COM 2 selects from either the USB or serial device.
•
Baud Rate - Either 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 baud
can be selected (default is 9600).
•
Parity - Either None, Even, or Odd can be selected (default is None).
•
Stop - Either 1, 1.5, or 2 stop bits can be selected (default is 1).
41
Hide quick links:
Advertisement
Table of Contents
