Wyse S10 Administrator's Manual page 17

Notable Wyse ThinOS Features
Use the Session tab to select the check boxes you want for the options that are available
to all sessions (the Smart Cards check box specifies the default setting for connecting to a
smart card reader at startup).
Tip
ICA sessions always have automatic connection to attached smart card
readers.
When using the Disks check box for automatic connection to connected
USB sticks, use the following guidelines:
- Support is for VFAT File System only, be sure that the USB stick you use is
formatted to FAT16 or FAT32.
- More than one disk can be used at the same time, however, the maximum
number of USB sticks (including different subareas) is 12.
- It recommended that you use Windows XP, Windows Server 2003, or
Windows Server 2008 for the server.
- Be sure to save all data and sign off from the session mapping the USB
stick before removing the USB stick.
Use the ICA tab to select the check boxes you want for the options that are available to all
ICA sessions. Note the following:
Map to - When a drive is entered, maps a disk under the drive.
Map all disks under (z:) - When selected, maps all disks under the Z drive.
Use the RDP tab to enable or disable Network Level Authentication (NLA). The NLA
authentication method verifies users before they are allowed to connect with a full Remote
Desktop connection.
11