Accessing System Information; Manually Configuring Global Connection Settings - Wyse S10 Administrator's Manual

10
Chapter 3

Accessing System Information

Use the System Information dialog box to view the following system information (Classic
Desktop - click System Information in the Desktop Menu; Wyse Zero Desktop -click the
System Information icon on the Wyse Zero Toolbar):
•
•
•
•
•

Manually Configuring Global Connection Settings

If you do not use INI files to provide central configuration (global connection settings) to
users, you can click Global Connection Settings (in the Connect Manager for the
Classic Desktop; in the List of Connections for the Wyse Zero Desktop) to open and use
the Global Connection Settings dialog box to configure settings that affect all of the
connections in your list of connections.
General Tab - Displays general information such as System Version, Serial Number,
Boot From, Memory Size (Total and Free), Terminal Name, IP Address, Net Mask,
Gateway, and DHCP Lease.
Devices Tab - Displays information about devices such as the CPU Speed, ROM Size,
Monitor, Parallel Ports, Ethernet Speed, Memory Speed, NAND Size, Resolution,
Serial Ports, and the thin client MAC Address.
Copyright/Patents Tab - Displays the software copyright and patent notices.
Event Log Tab - Displays the thin client start-up steps (normally beginning from
System Version to Checking Firmware) or error Messages that are helpful for
debugging problems.
Status Tab - Displays status information about TCP performance-related parameters,
CPU Busy, System Up Time, Wireless performance-related parameters, Free Memory,
and DHCP lease time remaining.
Tip
For information on configuring the thin client using INI files (recommended),
refer to Reference Guide: Wyse ThinOS
configuring the thin client locally using dialog boxes, refer to "Configuring
Connectivity Options" and "Configuring Local Settings Options."
TM
INI Files. For information on