Wyse V10LE Installation Manual
Vx0le conversion to wes2009
Hide thumbs
Also See for V10LE:
- User manual (70 pages) ,
- Administrator's manual (92 pages) ,
- Quick start manual (8 pages)
Subscribe to Our Youtube Channel
Related Manuals for Wyse V10LE
Summary of Contents for Wyse V10LE
-
Page 1: Installation Guide
Installation Guide Wyse VX0LE Conversion to WES2009 ® Wyse USB Firmware Tool Release 1.13 ® Products: V10LE, V30LE, V50LE, V90LE Issue: 060811 PN: 883887-26L Rev. A... -
Page 2: Ordering Information
End User License Agreement (“License”) A copy of the Wyse Technology End User License Agreement is included in the software and provided for your reference only. The License at http://www.wyse.com/license as of the purchase date is the controlling licensing agreement. -
Page 3: Table Of Contents
Contents Introduction Kit Contents 1 Overview 2 Wyse Technical Support 2 Related Documentation and Services 2 Wyse Online Community 2 Installing Flash and RAM Requirements 3 Procedures 4 What’s Next 6 Installing WES2009 Firmware Requirements 7 Procedures 8 Troubleshooting 13... - Page 4 Contents This page intentionally blank.
-
Page 5: Introduction
RAM module • Thermal pad • Wyse Conversion Labels (you must attach a Wyse label to each converted cloud client) • Microsoft License Labels (you must attach a COA label to each converted cloud client) Figure 1 Kit contents (items may look different or not be included in your kit) -
Page 6: Overview
To access international support, visit http://www.wyse.com/global. Related Documentation and Services Fact Sheets containing the features of hardware products are available on the Wyse Web site. Go to http://www.wyse.com/products/hardware, click the link for your hardware product, and then click the link for the Fact Sheet. -
Page 7: Installing Flash And Ram
Installing Flash and RAM This chapter contains information for Wyse V10LE, V30LE, V50LE and V90LE cloud client users who must install new flash and RAM. If you are installing firmware only, you can skip this chapter and proceed to "Installing WES2009 Firmware."... -
Page 8: Procedures
Chapter 2 Procedures Step 1: Remove the Top Cover Caution Follow all precautions listed in the Quick-Start Guide that came with your cloud client for disconnecting and reconnecting the cloud client. 1. Perform a proper shutdown of the cloud client by closing all files and ending your session, and then press the power button to turn off the cloud client. - Page 9 Installing Flash and RAM Step 2: Install the Flash Module Warning Flash modules may be susceptible to damage by Electro-Static Discharge (ESD). All industry-standard cautions should be followed to avoid ESD. Before you remove or install a module, touch any metal part of the chassis and keep that contact with the chassis during the installation process.
-
Page 10: What's Next
Chapter 2 2. Install the thermal pad by peeling off the clear strip and placing it (with textured strip facing up as shown in Figure 6) where the module was located. Make sure that the pad does not interfere with the connector pins or module locking clamps, and then lightly press to secure. -
Page 11: Installing Wes2009 Firmware
Installing WES2009 Firmware ® This chapter includes the requirements and procedures you need to install and use Wyse USB Firmware Tool to update your cloud client to WES2009 firmware. The purpose of the Wyse USB Firmware Tool is to configure a bootable USB key for device firmware. -
Page 12: Procedures
3. Create a shortcut on the desktop for the Wyse USB Firmware Tool.exe file. Step 3: Use Wyse USB Firmware Tool to Configure a Single USB Key to Install Firmware 1. Double-click the shortcut on the desktop for the Wyse USB Firmware Tool.exe file to... - Page 13 Installing WES2009 Firmware Figure 9 Wyse USB Firmware Tool wizard 2. Click Next to open the Select an Option dialog box. Figure 10 Configuration options 3. Select the Configure a single USB key to Copy or Update firmware option, and then click Next to open the Select the Configuration dialog box.
- Page 14 Chapter 3 data partition you have on the cloud client (outside of the partition used by the firmware). This option is only available for use with cloud clients using multiple data partitions totalling 4 GB or larger, allowing you to remove the partition used for custom data that is not write filter protected (this is the custom data partition outside of the partition used for write filter protected firmware).
- Page 15 At this time you can also replicate/duplicate the configured USB key (containing the firmware you want to push) for simultaneous usage on target devices (by users in several locations at the same time). For full Wyse USB ® Firmware Tool details, see Users Guide: Wyse USB Firmware Tool 1.13.
- Page 16 Administrator and other documentation for your cloud client are available at: http://www.wyse.com/manuals. Step 6: Attach a Wyse Conversion Label and Microsoft License Label on Each Converted Cloud Client The conversion kit is supplied with Wyse Conversion Labels and Microsoft License Labels that must be attached to each cloud client.
-
Page 17: Troubleshooting
Wyse USB Firmware Tool. If you experience problems booting from a configured USB key, it is recommended that you try a different brand of USB key. The following list of USB keys have been successfully tested with the Wyse USB Firmware Tool: •... - Page 18 Installation Guide ® Wyse VX0LE Conversion to WES2009 Issue: 060811 Written and published by: Wyse Technology Inc., June 2011 ® ® Created using FrameMaker and Acrobat...
Need help?
Do you have a question about the V10LE and is the answer not in the manual?
Questions and answers