Manual Connection Procedures - Wyse S10 Administrator's Manual

4
Chapter 2

Manual Connection Procedures

1. Click the System Settings icon on the Wyse Zero
Toolbar to open the System Settings menu, and then
click Remote Connections to open the Remote
Connections dialog box.
2. Use the Broker Setup tab of the Remote Connections
dialog box to configure one of the following connections:
• ICA or RDP connection (select None, select ICA or
RDP, click Configure Connection, and then follow
the wizard).
• A specific broker server connection (select Other,
Citrix Xen, or VMware View, and then enter the IP
Address for the server in the Broker Server box).
Note: For more details, see "Remote Connections."
3. Click OK, and then restart the thin client (click the
Shutdown icon on the Wyse Zero Toolbar to open and
use the Shutdown dialog box to restart the thin client).
(If You Configured an ICA or RDP Connection) After thin
client restart, click the Home icon on the Wyse Zero
Toolbar to open the list of available connections, click the
ICA or RDP connection you created, and then log in.
(If You Configured a Specific Broker Server Connection)
After thin client restart, the Login dialog box appears for
your server.
Enter the User name, Password, and Domain and click
Login.
After authentication is successful, your Wyse Zero
Toolbar is presented with your assigned connections
defined by the broker server.