Table of Contents
Advertisement
Configuring Local Settings Options
Use the following guidelines for the SMBs tab:
•
Select SMB - Select the SMB you want from the list.
•
Printer Name - Enter the printer name.
•
Printer Identification - Enter the type or model of the printer. This name should be
either the device driver name for the printer under the Microsoft Windows system, or a
key to map to the device driver. If not specified, the name will be defaulted to the
printer-supplied identification for standard direct-connected USB printers or Generic /
Text for non-USB connected printers upon connection to Windows hosts. The driver
name mapping takes place either through a printer-mapping file read by the system as
part of the global profile (wnos.ini) or by MetaFrame servers through the MetaFrame
printer configuration file (\winnt\system32\wtsprnt.inf).
•
\\Host\Printer - Enter the Host\Printer or use Browse next to the box to make the
selection you want.
•
Printer Class - Select the printer class from the list.
•
Enable the printer device - Must be selected to enable the directly-connected printer.
•
Enable LPD service - Select this to make the thin client an LPD (Line Printer Daemon)
server for LPD printing requests from the network (see "Configuring LPD Services").
Use the following guidelines for the Options tab:
•
Default Printer - Select the printer you want to be the default printer from the list.
•
Enable .print Client and Port - If you want to enable .print Client, select Enable .print
Client and then enter the Port.
45
Hide quick links:
Advertisement
Table of Contents
