Adapter For Danfoss - HomeMatic HMIP-eTRV Mounting Instruction And Operating Manual

Radiator thermostat
Table of Contents

Advertisement

Available languages

Available languages

Start-up
44) or the supplied support ring (see „5.2.3 Support
ring" on page 48).
5.2.2

Adapter for Danfoss

One of the provided adapters is needed to attach to Dan-
foss valves. The assignment of the suitable adapter to the
relevant valve can be found in the following illustrations.
Please ensure that you do not trap your fingers
between the two halves of the adapter!
The RA and RAV adapters have been manufactured with
pre-tension in order to provide a better seat. Use a screw-
driver during installation if necessary, and bend it open
slightly in the vicinity of the screw (see following figures).
44
Danfoss RA
The Danfoss valve bodies have elongated notches (1)
around their circumference, which also ensure that the
adapter is properly seated when it snaps on.
During installation, please ensure that the pins in-
side the adapter (2) are lined up with the notches
(1) on the valve. Ensure that a suitable adapter for
the valve is properly clipped on.
After clipping onto the valve body, please attach the
adapter using the provided screw and nut.
Start-up
1
2
45

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents