Logo Registration; Driver Compatibility; Usb Power-Saving Function; Maintenance Counter - Epson TM-T70II Technical Reference Manual

Logo Registration

The TM-T70II can register logos in the NV memory (NVRAM) with the TM-T70II Utility, while
the TM-T70 can register logos with the TM Flash LOGO Setup Utility for NVRAM (TM-Flogo).
For detailed information about the TM-T70II Utility, see the TM-T70II Utility User's Manual.

Driver Compatibility

You can operate the TM-T70II with a driver for the TM-T70 (APD Ver.3xx or later or APD Ver.4.54
or later).
You cannot operate the TM-T70 with a driver for the TM-T70II.
Advanced Printer Driver
When the TM-T70 was controlled by APD Ver. 4.00 ~ 4.53, you need to install APD Ver.4.54 or
later versions.
OPOS ADK
If the TM-T70 was controlled by an OPOS ADK, you can replace it with the TM-T70II without
modifying the OPOS ADK.

USB Power-Saving Function

With the TM-T70II, you can enable the USB power-saving function with the memory switch.

Maintenance Counter

For the TM-T70II, "Number of lines fed (when the print head was replaced)" is added.

Buzzer

For an application that can beep an internal buzzer of the TM-T70, the application can also beep
an internal buzzer or optional external buzzer of the TM-T70II without any changes of the
application. TM-T70II is available with an internal buzzer or without the buzzer. Even if you
purchase the one without the buzzer, you can attach an optional external buzzer. You can beep
Chapter 5 Replacement of the TM-T70
5
99