Printing And Cutting Positions; Paper Specifications - Epson TM-T70II Technical Reference Manual

Printing and Cutting Positions

Manual-cutter position
Autocutter blade position
Center of the print dotline
The values above may vary slightly as a result of paper slack or variations in the paper.
Take the notice into account when setting the cutting position of the autocutter.

Paper Specifications

Paper types
Form
Size Roll paper diameter
Roll paper spool
Roll width when taken up
Paper width
Specified roll paper type
34
Approx. 13
[units: mm (All the numeric values are typical.)]
80 mm width paper
printing
Specified thermal paper
Roll paper
83 mm {3.27"} maximum
Inside: 12 mm {0.47"}, Outside: 18 mm {0.71"}
80 + 0.5/-1.0 mm
79.5 ± 0.5 mm
NTP080-80
Approx. 30
Paper feed direction
58 mm width paper
printing
58 + 0.5/-1.0 mm
57.5 ± 0.5 mm
NTP058-80