Lock; Password - Honeywell MX9 Reference Manual

Lock

Start > Settings > Lock

Password

Set the lock / unlock behavior for the MX9.
Factory Default Settings
Prompt if device unused for
Timer
Password type
Password
Confirm
Prompt if phone unused for – Check the checkbox and set the inactivity timeout before the MX9 locks. When selecting a
Password type the screen displays a numeric keypad or the input panel depending on the type of password selected.
Note: Once a password has been entered, the password must be used to access the Lock panels again.
Select the Password type, Simple PIN (numeric) or strong alphanumeric. Enter the desired password and confirm. Note that
Windows Mobile places restrictions on what it considers a valid password. If the chosen password is not strong enough, a
warning is displayed and a new password should be entered and confirmed.
4-26
Unchecked
0 minutes
Simple PIN
<blank>
<blank>