Peripherals; Heaters - Honeywell MX9 Reference Manual

Peripherals

Start > Settings > System > Peripherals
This panel is used to enable and disable the touch screen heater and scan window heater, flashlight time delay to Off, and GPS
On/Off.
Settings have no effect if module is not installed.
Factory Default Settings

Heaters

Touch screen heater
Scan window heater
Flashlight
Turn flashlight off after
GPS
GPS Power
Heaters
Note: Settings have no effect if the touch screen / scan window heaters are not installed.
Click the radio button to enable or disable the heaters.
Enabled
Enabled
1 minute
On when installed / Off when not installed
4-107