Honeywell MX9 Reference Manual page 229

Parameters
Name text box
Name is the descriptor that is used to identify the custom Code ID. Names must be unique from each other; however, the
Name and ID Code may have the same value. Name is used in the Symbology drop down box to identify the custom Code ID
in a user-friendly manner. Both Name and ID Code must be specified in order to add a custom Code ID to the Custom IDs list.
ID Code text box
ID Code defines the data at the beginning of a bar code that acts as an identifier (the actual Code ID). Both Name and ID Code
must be specified in order to add a custom Code ID to the Custom IDs list.
Buttons
Entering data into both the Name and ID Code fields enables the Add button. Tap the Add button and the data is
Add
added to the next empty location in the Custom ID list.
Tap on an empty line in the Custom ID list. The Add button changes to Insert. Enter data into both the Name and ID
Insert
Code fields and tap the Insert button. The data is added to the selected line in the Custom IDs list.
Double tap on the item to edit. Its values are copied to the text boxes for editing. The Add button changes to
Edit
Replace. When Replace is tapped, the values for the current item in the list are updated.
When no item in the Custom IDs list is selected, tapping the Clear All button clears the Custom ID list and any text
Clear All
written (and not yet added or inserted) in the Name and ID Code text boxes.
The Clear All button changes to a Remove button when an item in the Custom IDs list is selected. Tap the desired
Remove line item and then tap the Remove button to delete it. Line items are Removed one at a time. Contents of the text
box fields are cleared at the same time.
6-33