Enable Code Id - Honeywell MX9 Reference Manual

For MX9 with Symbol Decoding Engine
Data Collection Wedge can only enable or disable the processing of a bar code inside the Wedge software.
Enabling or disabling a specific bar code symbology at the scanner/imager is done manually using the configuration bar code in
the Integrated Scanner Programming Guide.
For MX9 with Hand Held Products Decoding Engine
Data Collection Wedge enables or disables the bar code at the imager as well as enabling or disabling the bar code processing
in the Wedge software.

Enable Code ID

This parameter programs the internal scanner to transmit the specified Code ID and/or determines the type of bar code
identifier being processed. If the scanner being configured is not an integrated scanner, the scanner driver expects that the
setting has been programmed into the scanner externally, and that the data will be coming in with the specified Code ID
attached.
Transmission of the Code ID is enabled at the scanner for all bar code symbologies, not for an individual symbology. Code ID
is sent from the scanner so the scanner driver can discriminate between symbologies.
Options
Programs the internal scanner to disable transmission of a Code ID. The only entry in the Symbology popup list is
None
All.
Programs the internal scanner to transmit the AIM ID with each bar code. The combo box in the Symbology panel is
AIM
loaded with the known AIM ID symbologies for that platform, plus any configured Custom code IDs.
Programs the internal scanner to transmit the Symbol ID with each bar code. The combo box in the Symbology
Symbol
panel is loaded with the known Symbol ID symbologies for that platform, plus any configured Custom Code IDs.
Programs the internal scanner to transmit the HHP ID with each bar code. The combo box in the Symbology panel
HHP
is loaded with the known HHP ID symbologies for that platform, plus any custom Code IDs.
Does not change the scanner's Code ID transmission setting. The combo box in the Symbology panel is loaded
Custom
with any configured Custom Code IDs.
6-9