Eap-Tls - Honeywell MX9 Reference Manual

EAP-TLS

To use EAP-TLS, make sure the following profile options are used.
Enter the SSID of the Access Point assigned to this profile
l
Set EAP Type to EAP-TLS
l
Set Encryption to WPA TKIP
l
Set Auth Type to Open
l
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for encryption and complete other entries as
detailed in this section.
See Sign-On vs. Stored Credentials
Click the Credentials button.
No entries except the User Certificate Filename and the CA Certificate Filename are necessary for Sign-On Credentials
l
as the user will be prompted for the User Name when connecting to the network.
For Stored Credentials, User and the CA Certificate Filename must be entered.
l
Enter these items as directed below.
9-42
for information on entering credentials.